|
4 channel proportion radio control, 4 IN 1 electronic board
includes 2 speed controllers for 2* main motor,a mixer,a gyro.Left/Right,Up/Down,Front/Back,
control (THROTTLE,AILERON,ELEVATOR AND RUDDER).It Flies stably and silently
indoor and outdoor, just as walks in the air,enable you and your family
to get warmer ane enjoyment.LAMA2 which is with double-sharing-one-axis
structure and with stable and silent flight.is designed by professional
engineers.for the beginner,it is designed with simple glying operation and
easy to learn how to fly.You can be familiar with its operating way and
enjoy the flying in short-term.The helicopter is with two swing -hammers
that improve the ability to settle its axis and enable it to hang in the
air more stable.The helicopter is designed with double-blade-sharing-one-axis
that enables it to easy be operated and fly.The battery hang is designed
with simple and firm structure that enables the battery easy loaded and
unloaded.With power supply of Li-polymer battery enable it to fly lighter
and longer.Complete set,ready to fly.
Co-Co Lama is not a flimsy toy -- it is an extremely well-built and well-designed
radio controlled model helicopter. The 72 mHz radio, the motors, and servos
are hobby quality products that will provide many hours of service. If you
ever wanted to fly a micro electric helicopter but were put off by the difficulty
of flying a helicopter, Co-Co Lama is for you.
|
|
|
| |
Main rotor diamenter: 340mm.
Weight:215g.
Length: 360mm.
Power system:180 motor*2.
KIT/ART/RTF:RTF.
Transmitter: 4ch.
Mix controller: 4 in 1 controller.
(W/gyro.mixer,ESC,receiver).
Servo: 8g,1.3kg/cm,0,12s/60
Battery:7.4v800mAh Li-polymer battery
|

|
|
| |
4CH transmitter
New design 4 channels helicopter (pre-built,zero assembly time).
New 4 IN 1 electronic board: Receiver + Speed Controller + Mixer +
Gyro.
Powerful 2* main motors type 180.
Two 8g mini servos.
One pair of crystals
7.4V800mAh Li-Po battery
AC/DC Balance Charger-AC Input:AC110v-230v.DC input:12-15v.Output:3
pins BNC for 7.4v Li-Po battery (2 cells) with balance BNC/4 pins BNC
for 11.1v Li-Po battery (3 cells) with balance BNC.
English Manual.
Extra Plastic Main Blades
|
 |
 |
 |
| Well designed installation of servos, receiver, and
rechargeable battery |
Easy to understand quick-reading instruction book tells
exactly how helicopters fly. Shown with the included spare rotor blades. |
Contra-rotating, single axis rotors cancel torque effects. |
| |
|
|
 |
 |
 |
| Recharge the flight battery with the included charger
that you connect to your 12 volt automobile battery. |
High quality transmitter with
dual axis control sticks. |
2 cell 7.4 volt 800 mAh li-poly battery pack included.
Buy an extra battery pack (below) so you can fly one while charging
the other! |
|
|